Support iBT297 FAQ

How to Set the Alarm?

  1. Press and hold the Alarm Button for 2 seconds until the alarm time display and alarm icon flash. A beep sounds.
  2. Press the – or + Buttons to adjust the alarm time to the desired time (hold for rapid setting). Make sure you set the correct AM/PM alarm time. The AM and PM indicators appear to the left of the display.
  3. Press the Alarm Button to confirm the alarm time setting. The alarm schedule will flash: 7 (every day), 5 (weekdays) or 2 (weekend only). Press the – or + Buttons to select the desired alarm schedule.
  4. Press the Alarm Button to confirm the alarm schedule. The wake-to source will flash.
  5. Press the – or + Buttons to select the desired wake-to alarm source: Bluetooth, FM radio, Tone or Light Only (no alarm sound).

    • Wake to Bluetooth: You will wake to the currently linked Bluetooth device. If no device is detected, the alarm will default to the last tone selected.
    • Wake to FM radio: Press the Alarm Button to confirm. Press the Presets Button to select an FM preset to wake to, or press the – or + Buttons to tune in a desired wake to station.
    • Wake to Tone: Press the Alarm Button to confirm. Press the – or + Buttons to select the desired tone to wake to (Tone 1 -Tone 4).
    • Wake to Light Only: Press the Alarm Button to confirm. Select this mode to wake to silent light only alarm. (You will then skip volume setting and advance to step 9 Wake to Light setting.)
  6. Press the Alarm Button to confirm wake-to source. The alarm volume will flash (unless Wake to Light is set wake to choice, then volume setting is skipped and you are done).

  7. Press the – or + Buttons to adjust the alarm volume.
  8. Press the Alarm Button to confirm alarm volume. The current Wake to Light mode will flash.
  9. Press the – or + Buttons to select the desired light mode to wake to (Dawn, Slow Fade, Fast, One Color, Pulse, Sky Gradient, Lamp or OFF).
  10. Press the Alarm Button to confirm the alarm settings and exit alarm setting mode. 2 beeps will confirm alarm setting is complete. The alarm icon will remain on the display, indicating the alarm is armed.